Water pump EJG

Characteristics

Fluid
water, slurry
Operation
with electric motor
Technology
radial
Domain
industrial, for the metallurgical industry, for the paper industry
Applications
suction, sewage, collecting, drainage, for power stations, discharge, drainage, transport
Material
stainless steel, steel
Fluid specification
for solids-laden fluids
Other characteristics
suction, radial, vertical, with open impeller
Flow

Max.: 2,300 m³/h (81,223.73346 ft³/h)

Min.: 20 m³/h (706.29333 ft³/h)

Pressure

16 bar (232.06 psi)

Head

Max.: 60 m (196'10")

Min.: 8 m (26'02")

Description

End Suction, Semi-Open Impeller, Surface Pumps

EJG series Open-impeller pulp pumps is based on new technology, the pump is successfully design based on long-term technology accumulation and on the experience of domestic and overseas advanced technology. The pump has a strong capacity to transport fibre, mud, the paper pulp below 5% consistency and other liquid with below 30% solid content. It can be used in those operating environments in the paper making, metallurgy, salt collecting, drainage and power plant, etc.The casing is end suction and radial discharge design. Its discharge centreline and shaft are in the same vertical plane. The casing is directly fixed on the base-plate. The front wear plate and back wear plate be designed for stripped down structure. We can replace worn part when the inter-spacer becomes large.

Details

FlangeISO 7005-1, PN 1.6MPa
Materials Ductile Iron, Alloy Steel, Precipitation Hardening Stainless steel, Duplex Stainless Steel
MountingBare Shaft, Direct Coupled with Electric Motor or Engine

Specifications

DN80 – 450mm
Q20 m³/hr – 2300 m³/hr
O.P16 Bar
H8m – 60m
Ns1450 – 2950rpm (50hZ)
1750 – 3550rpm (60hZ)
t-20°C – 100°C

Applications

Pulp
White water
Green liquid
Fibre
Thick dark liquid
Bittern water
Sewage
PVC slurry
Polluted mud