- for adhesives, for resin, grease
- progressive cavity
- volumetric dispensing, micro-dispensing
- Fluid specification
- for medium-viscosity products, for high-viscosity fluids, for low-viscosity fluids
- stationary, mobile
230 mm (9 in)
374 g (13.19 oz)
Max.: 20 bar (290.075 psi)
Min.: 0 bar (0 psi)
- Fluid temperature
Max.: 40 °C (104 °F)
Min.: 10 °C (50 °F)
- Input diameter
0.3 mm (0 in)
The PCP 050 volumetric pumps is the state of art in the micro-dispensing world.
The pumps are drived by a gearmotor with encoder and allow volumetric dispensing in strips, drops, or fill a determinated volume with the highest accuracy, without be affected from inlet fluid pressure, viscosity and temperature of the media etc.
The motor, drived in one direction dispense the fluid, and if drived in the other direction suck back the fluid, preventing dripping and levelling the pressure on the nozzle.
FIELD OF APPLICATION:
> Silicone dispensing
> Grease dispensing
> Resin dispensing
> Adhesive dispensing
> Low to high viscosity fluid dispensing
> Many sizes to allow the perfect choice for any application
> Dispensing not affected by temperature and viscosity changes
> Simple mainteinance due to the design of the pump
> Possibility to have special features such as body in PEEK, rotor in Ceramic, stator in PA etc.
> Possibility to dispense filled materials without wearing problems