Gear pump 3905027

Characteristics

Fluid
oil
Operation
with electric motor
Priming
submersible
Technology
gear
Domain
industrial, for the paper industry
Applications
recirculation, for lubrication systems
Mobility
stationary
Other characteristics
automatic, with tank
Flow

0.35 l/min (0.09246 us gal/min)

Weight

6.8 kg (14.99 lb)

Pressure

10 bar (145.038 psi)

Power

0.09 kW (0.12 hp)

Description

Motor Driven pump for oil lubrication systems

This oil gear pump is an oil control unit with a 3 l reservoir. It is comprised of a gear pump which sucks the lubricant from reservoir bottom (oil).
After the pump, there is also a safety by-pass valve and a pressure gauge.

The system is completed with a minimum level contact, a cap for reservoir filling and a 1/4 BSP inlet.

The pump motor is single phase.

This pump is equipped with an automatic system that stops operation in the absence of lubricant in the reservoir.

APPLICATION
Oil re-circulation is used extensively in the power industry and pulp and paper industry allowing for increases in operating speed and performance thanks to the fast change-over of lubricant that removes heat and provides full-oil immersion lubrication.

Key Features:
– Max working pressure: 10 bar
– Flow rate: 0.35 l/min.7
– By-pass setting: 6 bar
– Lubricants: Oil 32÷1000 cSt
– Working temperature: +5°C ÷ +60°C
– Reservoir: 3 l
– Motor: 1PH-230V-50HZ-0.09kW-4poli-GR56