Close-coupled pump FKS

Characteristics

Fluid
for wastewater, slurry
Operation
electric
Priming
self-priming
Technology
centrifugal
Domain
agriculture, for water treatment
Applications
sewage, irrigation, transfer, drainage
Material
stainless steel
Other characteristics
with mechanical seals, close-coupled, high-efficiency, corrosion-resistant, small
Flow

Max.: 1,450 l/min (383.04948 us gal/min)

Min.: 0 l/min (0 us gal/min)

Pressure

Max.: 10 bar (145.038 psi)

Min.: 0 bar (0 psi)

Head

Max.: 31 m (101'08")

Min.: 0 m (0'00")

Power

Max.: 15 ch (15 hp)

Min.: 1 ch (1 hp)

Description

Close-coupled Self-priming Pumps
Spec

Type:Other
Key Features

Features: 1. Close-coupled design, small size, space-saver,high efficiency, easy maintenance. 2. Adopt high quality Mechanical seal, to ensure no leakage and extend life time. 3. Semi-open impeller design, suitable for sewage ,waste water, sludge drainage. 4. Great suction ability(Max.5M). Free install bottom valve. After initial priming water inside pump , the pump will auto-exhaust the air. 5. FKS Pump body/impeller/shaft are stainless steel material for better corrosion-resistant . Applications: Agriculture irrigation, transfer underground water,waste water treatment, water supply for factory,wastewater drainage in construction site. Operating Conditions: 1.Ambient Temp.: 0~40℃ 2.Liquid Temp.: 0~60℃ 3.Working Pressure: Max. 10 bar 4.Suction Lift: Max. 5M 5.Solid Passage: Max.5MM Specification: 1.Power: 1HP~15HP 2.Motor IP Protection: IP54 3.Motor Insulation: E,B,F Class 4.Pole: 2P 5.Voltage: 1 phase-110/220V*60HZ; 1 phase-220~240V*50HZ(Below 2HP) 3 phase 220~660V 6.Inlet/Outlet: 5”~ 4” 7.Max.Head: 31M 8.Max.Flow Rate: 1450LPM